RESEAL-Lubricant anti-corrosion protection Brunox Lub&Cor 20 liters

Description

"RESEALATED" product: the can is deformed during transport. The product is unused and sealed.

Brunox® Lub&Cor® - All-weather lubricant and high-tech corrosion protection

Brunox Lub&Cor is a high-quality long-term lubricant that provides protection against corrosion (rust) for metal products, machines, equipment, metal components and sports equipment. It is used in particular for the preservation of weapons or other metal components, which it protects against corrosion for periods of up to 3 years when stored and transported indoors, up to 1 year in covered outdoor spaces or up to 5 months outdoors.

Designed in Swiss

NATO certified product - Code S-761

BRUNOX® LUB&COR® forms a protective, anti-corrosive, uniform film that does not dry out and penetrates into small, hard-to-reach spaces, covering and protecting the edges of surfaces very well. At the same time, it is a weather-resistant lubricant that performs very well in saline and acidic environments.

Lub&Cor is thixotropic, so it must be stirred well before use. It is applied evenly to the dry surface* with a brush, airless gun or compressed air. The thickness of the applied layer should be approximately 5 to 20 μm, i.e. an area of ​​approximately 20 to 40 m² can be treated per liter. BRUNOX LUB&COR can be removed after successful protection with a detergent, such as anionic surfactants. * If the surface is slightly damp, we recommend a pre-treatment with BRUNOX® Turbo-Spray®. Spray into all cracks and corners so that moisture is expelled; any existing water droplets simply roll off onto the surface. With a cloth, wipe off any remaining BRUNOX Turbo-Spray layer and then apply BRUNOX LUB&COR.

Product advantages:

• It does not solidify.
• Does not contain silicone, PTFE, graphite or nano-ceramic particles.
• Does not attack plastic, rubber or paint.
• NSF-H2 certified.

• Long-term lubricant – up to 5 times longer lubrication intervals.
• Lubrication according to Brugger /DIN 51347: 55.0 N/mm²
• Winner of 3 awards in corrosion testing.

            - Caliber, issue: 1/2013

            - MESSER MAGAZIN, issue: 6/2013

            - DIE WAFFENKULTUR, issue: 12/2013

PRODUCT SPECIFICATION:

Brand/manufacturer: Brunox AG. Switzerland / Brunox Korrosionsschutz Gmbh Germany

Solution range: Lub&Cor - all-weather, long-term lubricant and high-tech corrosion inhibitor

Use: Anti-corrosion protection for transmission boxes, slides, steel cables, machinery, precision tools, semi-finished and finished products, molds, crane elements, vehicles, installations and all kinds of equipment. Winter anti-corrosion protection for all types of equipment, machinery and machines. Lubricant for gates, cranes, conveyor belts, cable installations, railways and all metal parts that are in motion. Lubrication and preservation of all types of weapons. Lubrication and anti-corrosion protection of pumps and installations in technical rooms of water and gas operators and transporters. Anti-corrosion protection of high-tech equipment transported in maritime containers, in saline or saline vapor environments.

Film Thickness: 5 - 20 microns (μm)

Covering Power: 40 m²/liter at 5 μm thickness

Film Appearance: Non-hardening, olive-yellow color, thixotropic

Cleaning/removal: if necessary, it can be easily removed after successful protection with any detergent, such as anionic surfactants.

Specific gravity/density: 0.85 ± 0.02 g/cm³ at +20°C

Drying time: solvent evaporation in 2-4 hours depending on environmental conditions (temperature and humidity)

Viscosity: 85 mPas (Bulk) / 8.3mPas (spray), at 20°C

High temperature resistance: 41°C... 100°C long term

Flash point in open container: <0°C (spray) / 51°C (bulk)

Packaging: 20 liter canister (package deformed during transport)

Certifications: NSF H2 / NATO CODE: S-761