Brunox IX100 anti-corrosion protection spray
Description
Brunox™ IX100 - LONG-LASTING ANTI-CORROSIVE PROTECTIVE WAX
Spray style application.
Protective wax for outdoor storage (summer/winter) and - especially - for transport in highly corrosive environments (maritime). For the protection of engines or other equipment operating in corrosive or very humid environments - industrial pumps in pumping stations or thermal power plants, etc.
It is also used as a cavity wax for the inside of car doors or to protect sensitive parts.

It forms a protective, anti-corrosive, wax-like layer, effective in the harshest environmental conditions. The layer remains compact over time and seals perfectly (if correctly applied). It has very good resistance to weathering and even washing.
.
PRODUCT SPECIFICATION:
Manufacturer: BRUNOX AG Switzerland, Tunnelstrasse 6, CH – 8732 Neuhaus/SG, d-sch-ag@brunox.com
Responsible entity in the EU: BRUNOX Korrosionsschutz GmbH, Germany, Postfach 100127, DE – 85001 Ingolstadt, d-sch-gmbh@brunox.com
Importer and distributor in Romania: Sprinter 2000 S.A., Brasov, str. Nicolae Iorga nr. 2 etaj 3, Romania, comenzi@sprinter2000.ro
Product trade name: Brunox IX100 / manufacturer code BR100IX0,50TS
Product type: anti-corrosion protective and sealing wax in spray form. Provides long-lasting protection when chrome plating/painting/galvanizing is not desired.
Destination: engines, coils, valves, machinery, semi-finished products, agricultural machinery protected during winter, bodywork (inside doors, sills), etc. Depending on the application, the product provides corrosion protection for up to 5 years
Effect: BRUNOX® IX 100 forms a compact protective film with a waxy appearance, which does not become brittle and protects for a long time in the most varied conditions: against the direct action of environmental factors, combustion gases or salt water.
How to use: BRUNOX® IX 100 is applied in a uniform layer on the dry surface*, if necessary in several layers, by spraying, with a brush or with a gun with or without air. The parts can also be treated by immersion in the solution, if packaging in a can is chosen and not in a spray. The thickness of the applied layer should be at least 20 μm. The best corrosion protection is achieved when the layer thickness is approximately 50 μm
For spray application in deep and narrow spaces, we recommend that you purchase the Brunox BR60LANCE extension tubes with a length of 60 cm separately (click for details, price and adding to order).
*If the surface is damp, it is recommended to pre-treat with BRUNOX® Turbo-Spray®. Spray this over the entire surface, into corners and cracks, so that the moisture is removed and any traces of water run off. Then wipe the BRUNOX® Turbo-Spray® layer with a cloth and apply BRUNOX® IX 100.
Removal of the layer as needed: BRUNOX® IX 100 can be removed with ethyl alcohol, cleaning solvent or by pressure cleaning and a surfactant solution.
Film thickness: 20-50 microns
Density at +20°C: Aerosol spray version: 0.89 ± 0.04 g/cm3 / Can/bulk version: 0.93 ± 0.04 g/cm3
Viscosity at +20°C: Aerosol Spray = 48 mPas / Bulk = 480 mPas
Covering power/Yield: ~40 m2/l at 25μm layer / ~16 m2/l at 50μm layer
Film consistency and appearance: dry, touch-resistant, wax-like film
Drying time: partially dry, dust-resistant in 1-2 hours / hardens, touch-resistant after approximately 12 hours
High temperature resistance: hardened film withstands up to +80°C / flash point in solution +51°C at the bulk, in can / flammable in spray version due to propellant gas!
Duration of protection provided: up to 5 years indoors / up to 1.5 years covered / up to 1 year outdoors, uncovered.
Other remarks: does not contain silicone, PTFE, graphite
Color: brown - olive
Packaging: 500 ml aerosol spray (code BR100IX0,50TS). Other packaging available: 5 liter canister/can (code BR100IX5,00TS), 20 liter barrel (BR100IX20,00TS) or 200 liter (code BR100IX200,00TS).

Details
What customers are saying
Write a review and earn loyalty points worth RON 10.00.
