Transport case Peli AL5924-1018AC Single Lid

Description

Trusted by the U.S. military for over 40 years, Peli-Hardigg™ Single Lid cases offer 20% more material protection at the edges and corners where it's needed most, ensuring that valuable equipment is protected from almost any unforeseen event. Available in multiple sizes, these cases are fully customizable with a wide range of screw-on options, such as document holders, wheels, humidity indicators and more.

• Reinforced corners and edges for additional impact protection
• Molded ribs and corrugations for safe stacking, non-slip, strength and added protection
• Recessed hardware for additional protection
• Anti-shear locks, which prevent the cover from separating after impact and reduce stress on the hardware
• Patented molded metal inserts for attachment points and hinges, which provide strength and distribute the load
• Single-piece molded construction, made of lightweight high-density polyethylene.

The transport case is delivered equipped with 4 handles, and can optionally be delivered with wheels or a depressurization valve (request a quote by email).

It is tested and certified according to transport and military specifications, for resistance to water, dust, shock and vibration, saline environment, extreme temperatures, sun exposure, etc.

The lid can be completely detached, for easier loading/unloading. Made in the U.S.A., and imported by us only on order.

PRODUCT SPECIFICATION:

Peli-Hardigg™ Coding: AL5924-1018AC / AL5924_10_18 / AL5924_10_18CLZACSP

Material: Lightweight High Density Polyethylene / Silicone Foam O-ring Seal

Locks: Steel

Hardware: Standard comes with yellow carbon steel

Interior: Standard delivered empty. Optionally can be delivered with PE and PU foam, full or just padded (extra cost)

Number of wheels: standard without wheels

Available colors: Black

Interior dimensions: 150.5 x 61.6 x 71.9 cm

Exterior dimensions: 158.1 x 69.2 x 75.4 cm

Depth: Total 71.9 cm, of which lid depth 46.2 cm and base depth 25.7 m

Volume: 0.667 m³ (667 liters)

Weight: 33.6 kg net / 34.5 kg gross

Maximum recommended load: 791.8 kg

Temperature range: -28.89°C ... +60°C

Color: Gray (133 Fed Std 26270) / Black

Use: Industrial or military

Certifications and tests: Concentrated load - stacking load resistance, IAW DOT 49CFR 178.350 standard, test report TS-1019 A and B / Vibration - military standard MIL-STD-810E, Method 514.4, test report TS-1040 / Shock and vertical drop - military standard MIL-STD-810E, Method 516.4 procedure IV, test report TS-1005 / Extreme temperatures - military standard MIL-STD-810E, Method 501.3, proceed. I (Tailored, High temperature) Method 502.3, procedure I (Tailored, Low temperature), test report TS-989 / Relative humidity - military standard MIL-STD-810E, Method 507.3, Proceed. I, test report TS-1030 / Altitude, low pressure - military standard MIL-STD-810E, Method 500.3 , test report TS-919 / Dust and sand tightness - military standard MIL-STD-210C, test report TS-971 / Salt spray - military standard MIL-STD-810E, Method 509.3, Proceed. I @ 5%, test report TS-1038 / Spores - military standard MIL-STD-810D, Method 508.4, test report TS-979 / Water tightness - military standards MIL-STD-810D, Method 506.2, Proceed. I (Rain with Wind) MIL-STD-810D, Method 512.2, Proceed. I (Immersion one (1) meter), test report TS-1023 (rain) and TS-976 (submersion) /

*Sprinter2000 provides consultancy in choosing Peli™ flashlights and cases according to your needs. It also provides spare parts, consumables and in and post-warranty service for these products, being also an authorized Peli™ Service Center for portable surface projectors (Remote Area Lighting Systems - RALS). You can send us your questions or service requests here.

**All trademarks are registered or unregistered of Peli Products S.L.U., its parent company, subsidiaries and/or affiliated companies.